DIY wedding cape with a hood: how to sew, pattern

A flowing scarf for the temple - we sew according to the pattern with our own hands

When visiting a temple, every woman should be dressed appropriately. In particular, you need to pay attention to the headdress - women should only enter the Orthodox Church with their heads covered. For these purposes, they often use a light chiffon scarf or a regular scarf, however, if you are a believer and pay attention to this, we recommend sewing a simple flowing scarf for the temple yourself. Its pattern is offered below. To make a scarf you will need a minimum of time and materials, and the result will exceed all expectations!;)

Why do women wear headscarves in church?

Even in the Old Testament, the Apostle Peter called on women to put on a veil of humility and submission, thereby showing others “the power of a husband over them” (1 Cor. 11: 3-10). Ancient Byzantine women wrapped themselves in veils when leaving home, which served as a kind of symbol of chastity and a sign of marriage. Later, pious girls and women wore a headscarf to demonstrate their seriousness of intentions. Women of easy virtue, on the contrary, let their hair down and attracted the gaze of the stronger half of humanity. Over time, stereotypes have changed, but the Orthodox Church invariably honors the words of the Apostle Peter. According to another version, one of the girls saw the Lord God in a dream, who asked her to come to the service with her hair covered. The scarf was supposed to make her stand out from the crowd of parishioners so that the Almighty would send his Guardian Angel to her. The girl fulfilled God's request and told others about it.

What fabric is suitable for a temple scarf?

To create a flowing scarf, any light, breathable fabric is suitable. We recommend paying attention to the following options:

• guipure;
• silk,
• satin;
• organza;
• scalloped lace fabric.

It is not recommended to select fabrics that are too transparent, since, according to generally accepted standards, a woman in a temple should look modest and discreet. An exception is weddings: scarves made from thin, translucent materials are allowed here.

It is important to remember that the hood should cover the head and not be worn on it like a hat. In addition, the chest and shoulders should also be covered.

How to tie a scarf to church

There are several types of tying scarves, but fancy knots and lush bows are not suitable for the spiritual monastery. The image of a parishioner should be simple and modest. The main method is to use a traditional scarf, when the woman’s forehead is covered and the edges are secured with a decorative pin.

You can pass the edges of the scarf under your neck and tie it in a knot at the back.

The easiest way is to throw a scarf over your head and secure it to your hair with a comb or hairpin.

A thin scarf wrapped around a woman's neck looks practical.

Finished flowing scarves are often secured with a drawstring.

Guipure scarves-stoles are held on the head with a decorative button or brooch.

There are no special rules for tying a scarf; the main thing is that the woman is comfortable and that the accessory reliably covers her hair during service.

How to choose the color of the cape

It is extremely important to choose the right color of the cape-hood for the temple.

The white color symbolizes the miraculous light of God. It is appropriate for weddings, Christmas, Epiphany, Ascension and Transfiguration. A white cape is also worn for Easter services and the sacrament of baptism.

The black color of the scarf is the complete opposite of white. Such a headdress should be worn for repentance, renunciation of temptations, during fasting or mourning.

Colored capes can also be appropriate. For example, green - on Trinity, blue - on the days of veneration of the Mother of God.

Pros of models with a hood

Newlyweds choose hooded accessories for weddings for several reasons:

• Aesthetics
  – the cape adds femininity and innocence to the bride’s image. This element of clothing makes any representative of the fair sex especially attractive and mysterious;
• Compliance with church canons.
  - a special rite that believers go through. All traditions are observed in the temple, including those relating to appearance and choice of clothing. A wedding bolero will help you comply with church canons and at the same time look attractive and luxurious;
• Originality
  - modern brides believe that a veil is too traditional and even a banal element of clothing. Many people refuse this accessory in favor of capes.

How to sew a scarf for a temple with your own hands: master class

First, cut off the required amount of fabric for sewing the cape. Next, you need to fold the resulting segment in half and mark it as shown in the diagram. The dotted line marks the place where the drawstring will be sewn in; below (20 and 30 cm) there is a cape, which, falling, will cover the shoulders and chest. The cape gradually lengthens - from the chest to the center of the back. If desired, it can be lengthened or shortened. Having transferred all the lines to the fabric, we cut it out, not forgetting about the seam allowances.

There are two ways to sew a cape

The first method is simple, without a drawstring. In this case, we will need to carefully bend the edges by 2-3 millimeters and sew them on a typewriter, and run the lace prepared in advance along the bottom.

The second method is more difficult. We sew the drawstring from the wrong side along the marked line and stretch a satin ribbon or braid into it to match the cape, 50-70 cm long.

How to decorate a finished cape

A scarf sewn according to our master class is suitable for both everyday church services and holidays. It is important to remember that the Orthodox Church does not approve of jewelry, so it is important not to overdo it either with the brightness of the color of the product or with its decor. You can decorate such a cape with a small brooch or beads/beads along the bottom of the product.

Step-by-step master class on sewing popular models

The shape of head capes for church can be any shape, the main thing is that the product covers the head. The most attractive and simplest for beginners will be the flowing Don shawl and scarf. Step-by-step master classes will help you understand all the intricacies of the work process.

Don shawl

This elegant model with a hood is perfect for visiting a temple. The cape covers the shoulders, is complemented by ties, so it does not fall off the head. For production you will need:

• 3.5 m of openwork fabric;
• 2 m of bias tape;
• 1.5 m satin ribbon;
• a pair of end caps matching the color of the main material.

Creating a scarf for a temple using a pattern with your own hands is carried out in accordance with the instructions:

1. A 120 cm piece of fabric is folded diagonally at an angle of 90º and divided into two parts. The result is two rectangular pieces of material with parameters 120 x 70 cm.
2. One of the segments is folded with the wrong side up, and the bend is ironed.
3. The pattern is applied to the fabric, pinned, and the excess is trimmed off.
4. A drawstring is laid along the marked line, then the binding.
5. The neckerchief is decorated with lace, ribbons, it is possible to use an elastic band, and a decorative button at the bottom of the hood.

The Don scarf around the neck is designed specifically for visiting the temple. The model covers the head and shoulders. After visiting a sacred place, you can throw off the cape so that it falls freely on your chest. This gives women's images sophistication and romance.

Scarf

Snood is a universal item; if you choose the right material and design, it is suitable for church ceremonies. To make a cape for the temple, you need to prepare a piece of fabric with dimensions of 50 x 150 cm. The headdress is created as follows:

1. The material is folded lengthwise, with the front side facing inside.
2. The piece is pinned along its length. The result is a fabric tube.
3. The workpiece is turned inside out.
4. The edges of the cape are connected in a circle, stitched, but not completely, a small hole is left.
5. The open area is sutured, the snood is ready.

A simple church cape is quick to make and looks elegant. The color of the fabric must correspond to Orthodox canons. It is better to choose a light shade that is appropriate in almost any situation.

Both experienced needlewomen and beginners can sew a beautiful scarf for the temple. The basis is taken from ready-made patterns and master classes, which can be supplemented with your own design ideas. And, of course, we must not forget about the main rule of church etiquette: you should not attract increased attention to yourself, either by behavior or appearance.

Fold the material lengthwise, right side inward

Pin with pins

Unscrew the workpiece

Connect the edges of the cape in a circle, sew, leave a small hole

Sew up the open area, the snood is ready

How to sew a non-falling scarf for a temple: patterns for women and girls, instructions

The non-falling scarf in the temple is a tribute to the traditions and requirements of the church, which from time immemorial has called on women, girls and young women to enter the temple of God with their heads covered.

Every believing woman and girl should buy or sew a scarf for the temple with her own hands, and the most pleasing thing to look at is a beautiful, non-falling scarf. After all, each of our trips to church is a holiday for a pious soul, which must be accompanied by an appropriate attitude. In this article we will tell you how to sew a beautiful scarf for church for yourself, your daughter, mother, sister, friend or relative.

What should it be

It is advisable to have two or three types of church scarves so that you can change them, wash them, and so on.

Donskoy scarf of delicate color

If a girl is not whimsical, then one headdress can be used constantly.

For a holiday, it is advisable to have a white lace cape; if going to church falls on a day of mourning or fasting, then the attire should be black or brown.

It is recommended not to buy products with different patterns, words or designs. It would look out of place in a church.

You might be interested in this Interesting patterns and tailoring of things in boho style

The product should fit well on the head, not come off, not come untied, so that the girl does not distract her attention from the service in the temple. Therefore, the Donskoy shawl with ties, which covers both the head and shoulders, is perfect.

Headscarf for girls

Non-falling scarf for church: the better than usual

• Based on the name, it is clear that the scarf should not fall off the head even when bowing,
• covers the shoulders, which is important in the summer, when you want to wear a sundress, but because of the open shoulders you have to give it up
• very beautiful and elegant, you can safely wear it both to a festive service and to an everyday visit to church.

Especially at a wedding, the bride will look incredibly beautiful in such a scarf.

What is the best material to use to sew a non-falling scarf for a temple?

This scarf is sewn from a variety of materials, choose the one most suitable for you personally:

• guipure,
• fiston lace fabric,
• silk trimmed with matching lace.

The fabric for the scarf can be different, but light. Keep in mind that it can get hot during the service, so give preference to guipure, fiston lace or silk.

It is not advisable to select transparent fabrics, except for weddings, since in the temple there are generally accepted standards, the girl should not look flashy. You can sew a headscarf, headscarf, scarf, stole or cape, the main thing is that it “covers” your head and is not “put on”, such as a cap or hat.

Fabric consumption for a non-falling scarf for the temple

Consumption: with a guipure width of 140-150cm, from 110-120cm you will get 2 scarves; lace for this size is 3-3.5 meters (for 1 scarf); 1.5-1.6 meters of bias tape to match; 1.5 meter of thin satin ribbon; 2 end caps (or 2 beads)

Lace for a festive scarf

If you decide to knit ribbon lace with your own hands, I offer three options for patterns. The first one is a little more difficult ( but once you understand the principle itself, you will be pleased that you were able to master it

). The other two are simpler, knit faster and are much easier to sew on.

The first lace delighted me because it was convex and expressive, quite unusual. I had to rack my brains a little before I figured out its intricacies.

Since the older granddaughters treat each other with a certain degree of jealousy, I made the lace the same for both so that there would be no competitive moment.

I sewed all the patterned ribbons by hand to make the seam invisible, and I especially had to tinker with the embossed flowers. They were basted in almost every outer eyelet.

If the pattern seems complicated to you, do not take on the entire product at once; be sure to try making a small sample first. As soon as something starts to become clearer, then move on to the main canvas. This is an axiom for any knitting.

I liked the second option because it has a geometric lattice, correctly calibrated, almost like a checkered fabric, and at the same time, it is gentle, which reflects the character of my daughter: firm and at the same time infinitely feminine.

Scheme No. 2. Symbols are written on the image of Scheme No. 3.

And the third lace is for the youngest and reminiscent of a cloudless childhood: simple, cheerful and elegant. As soon as Masha put on her scarf, she immediately determined that she was the most beautiful in the house, she walked around and told everyone: “Motley, I’m beautiful...”

Scheme No. 3 with symbols:

Several months have passed since Easter, the girls wear my scarves to church with pleasure, they say that they are very comfortable, nothing falls off, does not twist, or gets in the way.

Shawl for the temple: DIY pattern

Visiting a temple requires appropriate preparation from a woman.
Particular attention should be paid to the headdress. After all, a woman should not enter Orthodox churches with her head naked. This problem can be solved in different ways. An ordinary scarf, scarf, stole - this is what many people use. But church scarves, which are also called Don, wedding or Easter scarves, are becoming increasingly common. We will tell you about the uniqueness of this product, as well as how to sew such a scarf with your own hands.

What kind of scarf should you wear when visiting a temple?

First of all, there must be at least one scarf. This is enough to visit the temple. But female nature does not tolerate asceticism. And the church does not prescribe that one should refuse to wear clothes if they do not violate the rules of chastity.

Symbolizing female obedience, the head cover can decorate a parishioner . Especially on holidays! The wardrobe of a temple visitor has several options for headscarves.

Much depends on the frequency of being within church walls. The minimum set is sometimes enough for visitors . For the holidays, a light (or white) headdress, plain or with a discreet ornament, is suitable. Fasting or mourning will require dark colors.

Pay attention to the pattern of the flowing scarf! Depictions of symbols of other religions, specific ornaments like hemp leaves, provocative inscriptions are inappropriate in a holy place.

Truly church-going women quickly learn to understand the color and design nuances of clothing for the church. The main principle is simple - clothes should be comfortable. This also applies to the scarf: it should not distract during the service by unraveling and falling off the head.

The Don scarf seems to be the best option: it does not fall off thanks to the ties, does not require constant re-tying of the ends, and covers the shoulders.

How to tie a scarf for a wedding. Bride's wedding dress code

Dress. If you decide to get married not on your wedding day, then the requirements for appearance will be traditional for all parishioners. The bride should wear a low-cut dress with a long skirt that covers her knees. Trousers, transparent sundresses and sleeveless dresses are unacceptable even in summer, as well as clothes in bright colors.

If the wedding takes place immediately after the registry office, then you need to choose a wedding outfit with an eye to church norms. For a dress with a deep neckline, open shoulders or back in church, you need a light scarf, long gloves or an elegant cape - they will wonderfully complement the festive ensemble, at the same time making it modest, touching and organic to the sacrament.

In any case, the bride’s wedding dress should be light, uncolored and covering her knees, chest and shoulders. When choosing a dress with a train, keep in mind that this is a Catholic tradition, but modern clergy are unlikely to show dissatisfaction with this matter. Claims may come from witnesses who will find it very difficult to hold the crowns over the newlyweds’ heads without stepping on the hem of the dress.

It is not customary to give or sell a dress worn for a wedding. It is stored along with wedding candles, icons and baptismal shirts.

Headdress and hairstyle. It is best to check with your priest in advance whether the crowns will be put on the head or whether they will be held by witnesses: the choice of mandatory headdress and hairstyle depends on this point. If the crown is placed on the head, it is better to choose a scarf made of cotton fabric, since synthetics and silk are very slippery. The scarf is traditionally tied under the chin. If you choose a scarf with long ends or a light scarf, you can throw it over your head, cross the ends under your chin and throw it over your shoulders behind your back.

The hairstyle for a wedding should not be very high or one that is easy to crush or dishevel. The best option for a wedding headdress, when the crown is held above the head, remains a veil covering the top of the head - a combination of convenience, beauty and adherence to the canons. An elegant solution is a tiny hat. It is very important to secure the headdress well so that you do not have to adjust it every now and then during the ceremony.

Shoes. Brides are not recommended to wear high-heeled shoes to their wedding. This is the voice of reason, not customs: you will have to stand on your feet for a lot of time, it is better to take care of your own comfort, so that after the wedding the ultimate dream does not become slippers. The best shoes for a wedding are ballet flats or pumps with a small, stable heel.

Makeup. The makeup on the bride's face should be soft, natural and minimal. Women with painted lips are forbidden to kiss a crown, cross, or icon, so when entering a church you need to get rid of excess makeup. It is better to stock up on special makeup removers, as well as cosmetics for reapplication.

How to sew a church scarf with your own hands

This airy beauty does not require the qualifications of a seamstress. You can sew a scarf for the church yourself.

Don scarf pattern

The universal pattern is made according to the pattern shown in the photo.

• Fold a sheet of paper 110 cm long and 70 cm wide in half so that the fold runs along the width.
• We turn the resulting rectangle towards ourselves so that the fold is at the top. This will be the back of the head, the face will be on the left.
• From the upper left corner we measure 50 cm along the fold line, 40 cm along the left side and mark.
• We connect two points with a rounded line, using a pattern or by eye - here we will have a drawstring.
• Draw the same line from the lower left to the upper right corner. This will be the bottom edge of the product. We cut off the excess along it.

Pattern sizes are adjusted to suit individual needs! Especially if the scarf is sewn for a child.

How to calculate the amount of fabric

By purchasing a meter of fabric 140–150 cm wide, you will receive one scarf and a strip of fabric 30 cm wide.

And from a 120 cm cut two scarves will come out for the temple; you can cut them in both length and width!

The product is quite simple to make, but it makes sense to first practice with a piece of unnecessary fabric. Do you suddenly want to experiment with length?

Choosing fabric for a church scarf

Festive, light, openwork fabrics are suitable . Their density can be different - we take into account the case, age, financial capabilities. The product can be very expensive or budget, strict and delicate.

Important! Transparent fabrics are only appropriate for weddings.

Particular attention is paid to color. You can remain a “correct” parishioner if you have a wardrobe that is rich in color! You just need to understand the peculiarities of color liturgical traditions.

• White is associated primarily with the image of the bride. But the main meaning of the white color, which combines the entire spectrum, is to symbolize the miraculous light of God. This is the color of Christmas and Epiphany, Ascension and Transfiguration, the beginning of the Easter service. Also appropriate for the sacrament of Baptism .
• The complete opposite is black . Repentance, fasting, mourning, renunciation of the temptations of the world are the reason for the black veil. Can be replaced with dark brown . is quite appropriate on an ordinary day when there is no holiday .
• A church scarf can be red
  from Easter to Ascension, and
  yellow on days of special veneration of God’s anointed, and green on Trinity, and heavenly flowers (on days of veneration of the Mother of God). Multi-colored scarves can create the necessary atmosphere of any religious event in the soul of a parishioner and in the church, as long as the principle of appropriateness is not violated.

We sew a church scarf

Step-by-step instructions will tell you the correct sequence of actions.

Preparing for work

1. Having secured the knowledge outlined above, we select the material for sewing the product and its finishing . We will need 2 m of bias tape, 3.5 m of lace, one and a half meters of satin ribbon or decorative cord, two ends - all to match the fabric.
2. Preparing the workplace . You will need a fairly large surface for cutting, a centimeter, scissors, thread, and pins.

Uncover

1. Carefully trim the edge of the fabric .
2. To get a symmetrical piece of material, carefully fold it diagonally at a right angle. If there is an extra strip of fabric on one side, cut it off.
3. Above we discussed the consumption of fabric and the advisability of choosing a cut of 120 cm. If it was made, divide the cut into two. To do this, first fold the fabric in half lengthwise and cut it. You should get two rectangles with sides of 120 and a width of 70-75 cm (with a fabric width of 140-150 cm).
4. We put one piece aside until next time, and work on the other.
5. Fold it in half with the inside out, and align it well . Carefully ironing the fabric on the fold will help with this so that it does not break. Place the fabric so that the fold is at the top.
6. Following all the rules for ironing delicate fabrics, we check the cleanliness of the soleplate of the iron, hands and the fabric itself! Carelessness can ruin an item before it is ready.
7. Let's start cutting. We can use the pattern described above. All the elements of the future scarf are marked on it. It is possible to do without a pattern, having completed all the steps necessary to create it on the fabric.
8. Attach the pattern to the folded fabric. We apply the upper left corner of the pattern to the upper left corner of the fabric, the fold lines and the left side of the pattern and fabric coincide.
9. We pin it together and trace it along the lower rounded part of the pattern (the edge of the product). Cut both layers of fabric along the marked line.
10. Cut off part of the pattern along the drawstring line. We remove the lower part and fix the remaining part again on the fabric.

Why are such scarves good for the temple?

• they do not fall off the head even when bowing,
• cover the shoulders, which is important in the summer, when you want to wear a sundress, but because of the open shoulders you have to give it up
• very beautiful and effective! Especially at a wedding, the bride will look incredibly beautiful in such a scarf.

Such a scarf is sewn from guipure, fiston lace fabric, or simply from silk and trimmed with appropriate lace.

Consumption: with a guipure width of 140-150cm, from 110-120cm you will get 2 scarves; lace for this size is 3-3.5 meters (for 1 scarf); 1.5-1.6 meters of bias tape to match; 1.5 m of thin satin ribbon; 2 end caps (or 2 beads)

This scarf was sewn for an adult, but my five-year-old daughter works as a model))), although the scarf looks almost as beautiful on an adult

1) cut the fabric (140cm wide) in half lengthwise (in advance! In the picture there is a plan of the already cut half.) 2) bend the strip of fabric along the width 3) cut off one of the lower corners (see photo below) 4) mark the drawstring

This is how we roughly cut off one of the bottom corners on the fabric

This is after they trimmed the perimeter with lace and sewed on the drawstring (the photo, as always, is uneven))), but in real life everything is smooth. )

lace and guipure are elastic, so I sewed them on an open stitch, but you can also use a double needle

I cut off the lace at the corners, and then sewed it with a small overlapping zigzag, then cut off the excess

We sew the drawstring from the inside out, although on another scarf I sewed it from the face - it also turned out well

this is how the drawstring looks from the front side in this case

thread a satin ribbon into the drawstring

I have end caps with a large hole, and the knot of ribbon slipped into it easily. That's why I came up with this design with a bead

model wearing a scarf

neck tie

behind. By the way, I’m planning to sew such scarves for my little ones this summer - they’re so beautiful!

And here’s what a children’s scarf looks like on a child.

I inserted an elastic band into the drawstring and secured it. And the scarf is fastened with a button so that the child does not accidentally tighten the ribbon around his neck.

They always ask for sizes for children's scarves.

Children, of course, are different, and it depends on the width of the lace with which you will trim the scarf (and in general, will you?))) but here is approximately what I drew. 80 cm of guipure will make THREE (.) scarves

By the way, the owner of the trademark of this scarf found me and threatened me with a court case and a huge fine if I did not delete this post. So, I got the cut right 100%!)))))

So, girls, take advantage. In an online store, exactly the same scarf made from exactly the same guipure costs 2,700, but for us it will cost 300 rubles, give or take. 9-10 times cheaper.

Added on August 11, 2015: Lately I’ve been getting comments on this post from anonymous people. And everyone, like a carbon copy, with irritation (if not anger), tells me that if you buy guipure and lace in a store, it will be more expensive than buying a ready-made scarf.

Gentlemen, don't bother! I will not delete or change this post, because... many of my guests have found it useful or will find it useful in the future! Look at the number of people who have favorited this post!

So, anonymous gentlemen, don’t try, I won’t answer you anymore!

added: March 2021. The cost today is as follows: guipure 380 rubles: 110cm = 418 rubles for TWO scarves, one = 210 rubles

Lace 80 RUR: 350cm = 280 RUR. Bias binding 9 RUR: 1.5 m = 14 RUR. Satin ribbon 4 rubles: 1.5m = 6 rubles. End caps 6 rubles: 2 pieces = 12 rubles

We don’t count the threads)) Total: 520 rubles - the cost of an adult scarf. But, by the way, you can find lace cheaper on the Internet.

How to sew a shoulder cape with a faux fur hood with video

The cape on the shoulders is considered an element of outerwear, which reached its peak of popularity with kings, knights and beautiful ladies. It may seem that this type of clothing has long gone out of fashion, but we know that everything is cyclical, and capes are again showing off on the shoulders of modern fashionistas. In order for you not to be left out, we will teach you how to sew a cape on your shoulders simply and with your own hands.

Little Red Riding Hood style

This cape model is similar to the style of the heroine of the fairy tale “Little Red Riding Hood”. It can be sewn for a girl for a child’s costume party, or just for your loved one. We will start with the simplest option for doing the job, which can be done even with a child.

You will need red fleece fabric, gold plated rivets, leather straps, scissors and glue.

Now you can get started. Fold the fabric in four layers to form a square and use scissors to cut out a semicircle

It will be very difficult for a child to work with a pattern, so this version of the cape without patterns.

Unroll the fabric once so that it is double-layered, and cut the neck so that it is not too small for you.

Next, cut the top layer of fleece exactly down the middle.

Attach gold-plated rivets along the edges of the front of the cape. Pierce the fabric with sharp teeth and fold it inward.

Glue the leather fasteners in the neck area with glue.

Make slits on the sides for the arms and that’s it, your beautiful flying cape is ready. The lower edges can be lined with faux fur, this will give the cape a rich look.

Wedding decoration

A wedding is a spiritual ceremony that unites newlyweds before God. It is very symbolic to make the obligatory cape with a hood for the bride with her own hands. She will look very gentle and feminine.

To get started, you will need light tulle 70 cm, lace about 3-3.5 meters, scissors, white satin braid and sewing items.

Fold the tulle in half and then follow the diagram in the photo below.

We mark a soft line on a piece of tulle; this will be the place where we will attach the lace and braid. Now we connect the line with the line drawn in the figure. We cut along it, so the bottom of the hood is formed.

Now you can decorate with lace. We begin to fix it from the vertical cut to the round one. Make sure that there are no folds at the corners.

From tulle we cut out a strip of about 1.5 m, 3 cm wide and sew it on the previously designated place. This is necessary in order to thread the braid and create a tail.

We thread the braid through, tighten it a little, and that’s all.

If the wedding is taking place in the winter, you can make a fur version of this cape, but it will not be suitable for church.

How to sew a scarf for a temple with your own hands, simple patterns

Every girl should carefully prepare for attending church. Headdresses deserve special attention, since Orthodox traditions do not allow women to appear in a sacred place with their heads uncovered. You can’t buy a suitable product just anywhere; it’s much more interesting to sew a scarf for a temple yourself; a pattern with your own hands will help you do it right. Making a headdress with your own hands does not take much time and is not difficult even for novice seamstresses.

Selection of material and model

The main principle of choosing a scarf is ease of use. It should not fall off the head, become untied, or distract from the service. Light openwork fabrics are suitable for young girls: guipure, lace, organza, tulle. Older women should pay attention to dense materials: silk, satin, cotton.

Transparent fabrics are only relevant for wedding ceremonies.

The color of the products is of great importance. A church scarf for holidays should be light, monochromatic, perhaps a discreet pattern. During fasting and mourning days, it is possible to use only dark shades: black, brown. White models will be an excellent addition to the bride’s image, appropriate for the sacrament of Baptism, Christmas, Epiphany, and Ascension.

The Easter scarf can be red. Blue is used on days of veneration of the Mother of God, green on Trinity. Multi-colored scarves are designed to bring a special atmosphere to religious customs. It is necessary to carefully ensure that the selected scarf is appropriate for a particular event.

Guipure

Lace

Organza

Tulle

Atlas

Silk

Cotton

A church scarf can be a stylish addition to a woman's look. Today there are different styles of the product. You can make the following models with your own hands:

• Don;
• hood;
• snood;
• shawl;
• scarf stole;
• headscarf.

A wedding scarf looks impressive, made in the form of a long, voluminous cloak with a cape over the head. The model will appeal to romantic natures.

For sewing you will need a piece of fabric with a suitable texture and color. From tools and consumables, you need to prepare a set of needles, threads, a sewing machine, and pins. Beads, beads, braid, ribbons, and buttons are used as decoration.

Donskoy

Kapor

Snood

Shawl

Kerchief

Bolero pattern for wedding. Wedding cape with hood - temple accessory

As a separate type of cape for a wedding dress, I would like to highlight the cape on the head for a wedding in a church. In addition to beauty, this accessory also has a very pragmatic meaning.

Openwork wedding cape

The bride wants to be beautiful and sexy on her wedding day. But church is not a place for revealing clothing.

A long wedding cape with a hood will hide open shoulders, bare back or inappropriate neckline during the wedding ceremony.

It will also replace the usual veil, if one is not provided by the designer of the wedding dress.

Wedding traditions encourage future wives to do handicrafts. It is customary for brides to show their skills in cutting and sewing, and not just buy a cape in a store or atelier. An experienced craftswoman or the Internet will tell you how to sew a wedding cape with a hood with your own hands correctly and accurately. There are a large number of simple and elegant examples on the Internet that even the most incompetent can master. Remember that the hood of the wedding cape should be wide enough so as not to spoil the hairstyle.

Pattern of a cape with a hood for a wedding

In summer, it is appropriate to sew a cape made of tulle, guipure or silk, and in winter, choose a thicker fabric. A warm accessory made of classic white velvet will look luxurious. It’s just right to decorate the product with lace, beads and rhinestones. But keep it concise. For a simple dress that is not overloaded with embroidery and details, sew a beautiful lace cape with rich trim. Then your work will attract attention and will be a bright accent in the outfit. If the dress itself is an art of design, choose the simplest possible pattern. And add decor only to the edges of the product.

As for color, the church is definitely against acidic and bright colors

Classic white would be appropriate. But pastel beige, lilac, gray and soft pink tones are also suitable.

It should also be noted that it is not recommended to rent a wedding cape, give it to salons or sell it after the ceremony. It is a personal accessory sanctified by the church, just like your marriage. Keep it carefully and let it be a reliable talisman of family happiness.

Fabric calculation

The amount of material depends on the style of the scarf. For snoods, products that cover the head, less fabric will be required compared to models that fall over the shoulders and chest. So, for a beautiful Don scarf for adults you need:

• piece of fabric 120 x 140 cm;
• lace for finishing edges - 3 m;
• satin ribbon - 150 cm;
• drawstring - 120 cm;
• a pair of beads for fixing on the ends of the ribbons.

Depending on the volume and splendor of the scarf, the specified amount of materials is enough for one or two products. Therefore, a piece of fabric is divided into 2 even pieces with parameters 140 x 55 cm.

To sew a scarf for a child, you need to measure the circumference of his head. If the size is 48 cm, another 40 cm is added to the resulting value to make the ties. The edges are finished with a hem seam with a closed cut. First, 0.5 cm is folded, ironed, folded a second time and stitched with a deviation from the edge of no more than 0.2 cm.