10 ways to decorate a car for a wedding with your own hands

Options for decorating a wedding car.

A wedding is the most important and long-awaited day for two loving hearts. This is why future spouses want their holiday to be perfect. But in order for everything to be exactly like this, they have to think through every detail of the wedding celebration as carefully as possible.

Proper decoration of wedding cars plays an important role in all this. Since the wedding procession helps set the right tone for the celebration, it is best to decorate it as original as possible. We will tell you how to do this with your own hands in our article.

What do you decorate a wedding car with?

Ideas for decorating wedding cars

Until recently, the most popular wedding decorations were balloons and satin ribbons. This decor was used to decorate both the bride and groom’s car and the guests’ cars. But recently, companies involved in preparing wedding celebrations have begun to offer their clients more original decor.

For example, the latest fashion is car coloring. If desired, the newlyweds can make any design on their car that matches the style of their wedding celebration. The best part in this case is that you can even make such an original decor yourself.

To do this, you only need a stencil of the future design and a can of spray paint. True, such decor also has its downside. You can only decorate your car or the car of one of your close relatives in this way.

Traditional decorations for the wedding procession:

Doll and rings
Balls of different shapes
Garlands of fresh flowers
Decorative hearts
Funny license plates
Stuffed Toys

Custom decor for wedding cars:

Bells
Flags of your country
Paper butterflies
Joint photos of newlyweds
Cans (they should also be decorated)
Original inscriptions or plaques
Rhinestones and sequins

How to beautifully decorate a car for wedding guests?

Of no small importance for maintaining the general style is the fact that all cars need to be decorated in the same way. Decorations for friends' cars at a wedding should be made in the same colors, using the same materials and compositions as the bride and groom, but in a more modest design.

Photos of wedding car decorations for guests

Of course, hearts, rings and other symbols of the newlyweds should not be placed. Universal - balls, bows, flowers, ribbons. The cars can be bright, but it is advisable to differ in color from the cars of the main characters of the event. Of course, ideally these are brands of the same type , but this is not always the case when choosing a cortege, especially if friends come in their own cars. Therefore, you should follow the general decor style, having agreed in advance.

How to make a decoration for the hood of a wedding car with your own hands from ribbons?

Decoration for the hood of a wedding car made from ribbons

Garland of ribbons

Wedding decorations

Wedding car in patriotic style

Recommendations for making roses for decorating ribbons

Recommendations for making bows

In principle, if you want your car’s decor to be as laconic as possible, then you don’t have to bother and just attach a few bright ribbons to the hood of the car. But as practice shows, such decor looks rather dull, so most newlyweds try to come up with something more original.

For example, the tapes are not attached parallel to each other, but are positioned in such a way that they create some kind of shape (rhombus, square, triangle). And to make the ribbon decor look even more original, it is decorated with flowers from the same ribbons. If you are afraid that you won't be able to make flowers, you can try decorating the hood of your car with bows. You can see how to make all these decorations a little higher.

But remember, in order for the decor to be as organic as possible, it is best to attach the flowers to the ribbons in advance, and only after that secure everything on the hood. If you first decorate the hood of your car with satin ribbons and only after that start fixing flowers on them, it is likely that by doing this you will loosen the adhesion of the decorative material, and your decoration will flutter in the wind as you move.

How to decorate a car for a wedding with ribbons with your own hands?

A master class on wedding car decoration will help everyone who wants to do it themselves, guided by their own taste, the general theme of the wedding, and its color scheme.

Photo of ribbon for a car for a DIY wedding

How many meters of tape do you need for a wedding car ? In order to calculate the footage that is needed, the length of the car hood should be multiplied by 1.5-2, depending on the mounting method. Then one end of the tape is folded in half, and an elastic band is sewn to it. When you put the ribbon on the hood, the elastic is tucked inside and the other end of the ribbon is folded under and sewn to the other end of the elastic. As a result, everyone sees only the feed. Everything is very simple.

You can decorate your car like this:

Take a tape twice the length of the hood, 3-5 cm wide.
Pull it through the radiator grille so that the metal bar of the grille is in the middle of the strip.
Stretch it on different sides of the hood so that the letter V is formed, and secure it with tape or an elastic band under the hood or tie it to any part inside the hood.
Then make your own small bows or flowers from satin or tulle. Their number will depend on your imagination : they will be located on the ribbon either tightly or at a distance of 10-15 cm. Between the flowers, if desired, you can tie long white or pink ribbons - the same tone as the flowers. While driving, they will fly freely in different directions.
You can make a large bow out of white organza by attaching it to the radiator grill so that its ends hang down almost to the level of the wheels.

Today, newlyweds are offered a wide variety of wedding decorative elements and attributes, many of which are made carelessly and inaccurately, but their prices are “off the charts.”

Many people recklessly buy them, without even thinking that all these accessories for the celebration can be created with their own hands.

Long ribbons of various colors are the most popular detail for decorating wedding cars. To laconicly decorate a car, simply attach several beautiful ribbons to its hood.

Long ribbons of various colors for a wedding car

Still, it’s better to make your own ribbons more original and unusual. For example, fix them not parallel to each other, but arrange them so that they have the shape of a rhombus, square, triangle . And to make the decoration from them even more unusual, it is decorated with flowers or bows. To make the picture look organic, flowers are attached to ribbons in advance, so that the finished decoration can then be attached to the car.

In order to sew a ribbon on a wedding car , you will need very little:

hard tulle;
satin ribbons (wide white and thin green);
artificial flowers;
spools of white and green threads,
scissors;
needle.

To create such a ribbon for a wedding car, you need to buy garlands of artificial flowers and some of the same roses. This decor has a V-shape, with the length of each strip being 1.7 m. First, four strips of tulle are measured (length 3.5 m, width 20 cm). The stripes are sewn one by one in the center, making folds. Each fold is ironed. The two strips are sewn together. The result is a tape 3.4 meters long with folds. Then a wide satin ribbon 3.8 m long is placed centrally along the folded ribbon and stitched three times: along the edges and in the center. To make it more convenient to attach the tapes to the hood, leave 20 cm of tape at the edges. The strip is folded in half, a corner is formed and stitched.

Photo of ribbon sewn onto a wedding car

Two 40 cm long ribbons are sewn onto the corner of the resulting sketch - they will then be tied to the car grille.

They start making decorations. Fold a green ribbon 3.4 m long in half. The garland with roses is divided into an even number of particles. They are strung on a green ribbon and sewn to tulle. The same thing is repeated with the second garland - with daisies. It is divided into equal particles and, sewn to tulle, they fill the intervals between the roses in the first garland.

When sewing flowers, they are raised so that the inflorescences cover the gaps. If desired, the decorations are decorated with roses, which will close the gaps between the flowers sewn to the tulle.

In this form, the tape is already ready for use. For greater effect, a ready-made flower arrangement, which was purchased along with the garlands, is added to the center. Having straightened all the flowers, they are sewn onto the corner of the V-shaped ribbon with flowers.

How are wedding rings attached to the roof of a car?

Wedding rings

Wedding rings in a flower arrangement

Wedding rings

Wedding rings made from scrap materials

Mounting recommendations

If you knitted the rings for rent, then you should not have any problems with fastening. As a rule, rented decor has a special magnet, which helps it to be securely fixed to the car. The only thing you should take into account is that this same magnet can scratch the surface of the car, so it will be better if you provide a backing that will protect your vehicle from scratches.

This could be a piece of fabric or paper. If you made the rings yourself and did not find a strong magnet, then try securing them to the car using satin ribbons. To do this, take pieces of tape (their length must be at least 3 meters) and wrap some ends around the rings, and fix the others on the handles inside the car (the passenger can hold on to them while driving).

Yes, and remember that in this case you need to very carefully calculate the length of the ribbons with which you will attach the wedding rings. If it is too small, then you will not be able to form beautiful bows on the handles from them, and then you will just have to tie them with secure knots.

How to sew a big wedding bow

To sew a large beautiful bow for a wedding car yourself, you will need a certain amount of light textiles. To further decorate it you need to prepare:

Real or artificial flowers.
Satin ribbons.
Glue gun or stapler.
Fern leaves.

Having prepared all the components necessary for decorating wedding cars, you can start working with tulle or other material. To make a large bow that will be attached to the trunk of a car, you will need at least 10 meters of basic fabric:

Lay out the fabric on a free space (table or floor of a spacious room) and mark the middle of the cut.
Tied in the marked place with a satin ribbon, the color of which corresponds to the color and shade of the main material. White silk or tulle is tied with a white ribbon, red silk is tied with a red one.
The petals of the bow are folded on both sides of the middle, and the free ends of the cut are secured with ribbons to the middle.
To hide the connection and the band, a flower or a whole flower arrangement is placed in the middle.

You can attach a bouquet or smaller bows using a glue gun or stapler. However, for greater reliability, all linings are stitched with silk or nylon thread.

Having tied the fabric to mark the middle, the free ends of the satin ribbon are left on the wrong side (back) of the decorative element.

They will be used to attach the product to the bumper or trunk and will ensure that the bow remains stationary while the car is moving at considerable speed.

A composition of fresh or artificial flowers is made up of plants whose color contrasts with the shade of the large bow. A large bow made from a denser material will not lose its shape and attractiveness.

This can be floral felt, on top of which organza or tulle is attached.

Making this decoration is quite simple:

The ends of a strip of felt at least 3 m long and 1.5 m wide are folded to the previously marked middle and stitched with nylon thread.
At the junction, the fabric is gathered with an accordion and tied with a satin ribbon, the ends of which are cut and glued with a glue gun.
Now you need to make a second bow of the same size, only smaller. To do this, take a strip of felt of a different, more delicate or brighter shade. Its length will be 2 m, and its width will be 1 m. All previously performed operations are repeated in the same order.
The small bow is attached on top of the large one with glue or securely sewn on.
The selected decorative element is placed in the middle of the decoration. This could be a large artificial flower or a composition of living plants, a bright metal decorative item, or even a soft toy. The choice depends on the style in which the wedding is being held.

Such a bow will not lose its shape due to the wind and will retain its attractiveness despite the fact that the wedding procession will travel a considerable distance.

How to make a large organza bow for the trunk of a wedding car?

Red organza bow

Pink organza bow

Large organza bow for the trunk of a wedding car

Organza is a material that allows you to create bright and original decorations without much effort. Therefore, if you decide to decorate your wedding procession with huge airy bows, then organza is exactly the material you need. With its help, you can definitely create a voluminous decor that will look very cute and attractive.

If you wish, you can make calm, monochromatic bows or combine two colors in one product at once and get a truly memorable decoration. This material also makes it possible to make two or even three-layer bows. All that is required of you to create this decor is to make 2 or 3 bows, and then carefully place them on top of each other.

Recommendations for making an organza bow:

We measure out the required amount of material
Sew a rectangle out of it
Lay out the resulting workpiece on the table and divide it exactly in half
We take a piece of organza or satin ribbon and tie our rectangle right in this place
We straighten the ends of the bow and decorate the middle with flowers or any other decor.

Modern design trends: decorating the main car for a wedding in various ways

Photo from website: nevesta.info

First of all, you need to understand that the design of decorations for cars at a wedding will depend on their brands, colors, as well as the time of release, the general stylistic orientation of the entire celebration, as well as many other minor factors that should never be overlooked out of sight. Moreover, decorating the head car, in which the young spouses will travel, is the most responsible and important matter. It is worth paying enough attention to this moment so that the holiday goes off, as they say, without a hitch.

Need to know

To make the holiday perfect, the decoration of the car for the wedding of the bride and groom, as well as all the cars that will be included in the motorcade, must be decorated in the same style. However, only the lead car is luxuriously decorated, and the rest should never overshadow the newlyweds’ car.

To begin with, it is worth understanding that most often the decor of a wedding procession is meant to be done using beautiful satin and satin ribbons, flowers, balloons, tulle and similar materials. Among other things, many people prefer to make such decorations for the bride and groom’s car with their own hands, then the result will definitely be unique and original. But this, of course, is a matter for each person specifically, as well as the availability of free time. It’s worth evaluating a few simple recommendations that will definitely help you do everything so that car decoration becomes evidence of excellent taste and will be remembered for a long time.

Photo from website: svadebka.ws

If you are planning a wedding in a retro style, then you need to select vintage cars. However, you need to know that retro cars are decorated only a little, since they themselves are essentially a kind of holiday decoration. It is better not to decorate the car in the motorcade at all, with the exception of colored ribbons or flowers on the rear-view mirrors.
It is also not recommended to overload a huge limousine for the bride and groom with decorative elements. This is a status car that does not require special decoration. Roof rings and a couple of contrasting ribbons are all that is needed.

Photo from website: fenixevent.ee

Often, a wedding cortege, in addition to the bride and groom’s cars, includes cars of relatives, friends and other invitees, therefore it is quite “motley”; such a cortege can be arranged by color, from the lightest to the most saturated, or vice versa.
The same garlands on all cars that will move behind the head one will make it harmonious and discreet, and the spectacle will be simply magnificent.

Photo from the site: svadba-msk.ru

To prevent car decor from looking tasteless and too colorful, you should use no more than two or three colors at a time. Too loud shades in large quantities can create the impression of vulgarity, and no one wants this.

How to make hearts for a wedding car with your own hands?

DIY hearts for a wedding car

A hand-made scarlet or pink heart can become the highlight of the wedding decor for the festive procession. There are several ways to make this decoration. You can make a heart from polystyrene foam, cardboard and ordinary wire.

But remember, no matter what option you choose, in the end you will still need to further decorate the finished product. Therefore, it will be better if, in addition to the frame, you also make beautiful flowers, for example, from ribbons. We told you how to make them at the beginning of our article.

Foam heart

Foam heart:

Take a sheet of foam plastic and draw a heart of the size you need on it
Step back 3-5 centimeters from the resulting line and draw another heart inside
Then take a sharp knife and cut the workpiece along the lines
Next, take the ribbon of the desired color and wrap it around your workpiece
If you don’t like this method of decoration, you can try painting foam hearts

Wire heart

Wire heart:

Take a thick wire and give it a heart shape
Carefully wrap the resulting frame with padding polyester and secure it with tape
Wrap the blank with ribbon, satin or organza and decorate with fresh or decorative flowers

Cardboard heart

Cardboard heart:

Take thick cardboard and cut out two hearts of the same size
Fasten them together with glue and wait until they stick together as well as possible
Cover the back of the heart with white paper or organza
Decorate the front side with red or pink material and decorate everything with flowers, bows and butterflies

How to make a decoration for a wedding car with your own hands?

Wedding decor can be easily done with your own hands, the main thing is a little patience and perseverance. One of the most popular decorations on a car is, of course, large wedding rings on the roof of the car .

Master class on how to make gold rings on a car

For the rings you will need: a corrugated pipe 2 meters long, polystyrene foam, bright gold ribbon, tape, glue, scissors.

Gold rings for a wedding car

Stages of work:

The corrugated pipe must be cut into two parts and connected into a ring. Secure with tape.
Wrap the rings with ribbon: here you can show your imagination and use not only gold color.
The two finished rings must be glued together and wrapped with tape.
Next, take the foam: you need to attach the finished rings to it. The entire structure is assembled together - fixed with glue and additionally decorated with fabric, flowers and ribbons. For better grip, the corrugated pipe can be pierced with a knitting needle.

Satin ribbons look very beautiful , and it’s also very simple. What you need: satin ribbons of the desired color, scissors, floral arrangements for decoration.

Stages of work:

The required sections are cut from the tapes to the size of the hood plus a little for fastening.
The tapes are attached to the hood in the desired order - diagonally, from the edges to the center or vertically from the side. You can attach it with tape or rubber bands, pressing the bottom edges with a lid.
Decorate the attached ribbons with flowers. The decoration is ready.

Miniature boutonnieres will be an excellent decoration for door handles; they can be attached to the same satin ribbons. The hood or roof will be decorated with figures of the bride or groom, or paired swans. Or you can make hearts from paper napkins .

How to make cute hearts from napkins step by step? For work you will need: napkins of the desired color, cardboard, glue, stapler, scissors, pencil, double-sided tape.

Stages of work:

From cardboard you need to cut out a heart of the required size and a separate strip for the sides.
Fold the strip in half lengthwise and make cuts along the bottom with scissors for fastening.
Attach the strip to the base with the cut side down using double-sided tape to form sides.
On 3-4 napkins you need to draw circles with a pencil and stitch them with a stapler, crosswise. Then cut out the resulting circles and gather the layers, crushing them with your fingers to form petals.
Glue the finished roses to the base with glue, placing them tightly together. The paper heart is ready.

Decorating your wedding car yourself with flowers

Flowers are a must in the decor of the motorcade! Of course, fresh flowers look fresher and better than artificial ones, but when decorating a car, it is better to opt for the latter - they will retain their appearance longer.

How to make flowers with your own hands? Very simple. The main thing is to stock up on the necessary materials: fabric, wire, floral ribbons, glue and scissors. Buds can be made from felt, tulle, floral paper, or you can purchase ready-made artificial flowers.

Corrugated paper buds for a wedding car

Buds made of corrugated paper look very interesting and delicate . For these flowers you will need: sheets of corrugated paper, white, pink and green, scissors, glue, wire or skewers for the stems.

Stages of work:

Cut petals of the required size from white and pink sheets - depending on the type of bud, whether it will be a rose or a peony.
Make a core for the bud out of paper.
Attach the core to a wire or skewer with glue.
Attach the petals one by one around the base, collecting the bud.
Cut a strip from a green leaf for the stem and wrap it around the wire, securing the petals. You can cut leaves from the same sheet and also attach them to the stem with glue. The bud is ready.

You can use corrugated paper to make several colors to decorate your car.

How to make a bow for a wedding car yourself?

fluffy bow is attached behind the car . These bows are the easiest to make. Any fabric is useful for making: satin, tulle, felt.

Master class on how to make a satin bow in just a few simple movements. For it you will need: a piece of satin, tape for fastening.

Stages of work:

The fabric should be spread out on a table or other hard surface.
Then fold it in three so that you get a strip. It is better to fold it inward so that the edges of the fabric are not visible.
Mark the middle of the strip and bend the edges so that they lie crosswise, leaving an untouched part of the strip between them.
After this, the fabric is gathered together in the middle and tied with tape. Adjust the edges and the satin bow is ready.

Another version of the bow is made of felt. For it you will need: felt in two colors, for example, white and pink and of different sizes, rubber bands, and a glue gun.

Felt bow for a wedding car

Stages of work:

A large piece of felt needs to be folded with the edges towards the middle and the edges secured with a glue gun.
Then, at the gluing site, the fabric is collected and tied with an elastic band. It turns out to be a bow.
A second cut is placed on top and folded in a similar way so that the assembly point of both cuts coincides. Once again it is tied with an elastic band.
The elastic band can be covered with a satin ribbon or a decorative element, for example, a decorative butterfly or flower. The bow is ready.

What if you dress your car in a wedding hat?

Wedding hats - the groom's top hat and the bride's hat or veil are also an excellent option for decorating a car roof. How to make a hat with your own hands? Here you will have to work a little, but the result will be worth all the effort. For the hat you will need: three sheets of whatman paper (one A1 and two A2), PVA glue, glue gun, Moment glue, hat fabric (at least 1 by 1.5 meters, preferably water-repellent), three meters of white tape, newspapers, thick ribbon , cardboard.

Wedding hats on the roof of a wedding car

Stages of work:

Base for a hat. Two circles with a diameter of 26 and 37 centimeters are cut out of sheet A1, with a reserve for fastenings. The two remaining sheets of whatman paper are fastened together in the shape of a tube using a glue stick. The prepared circles are attached to it on both sides - this is the bottom and top of the hat.
PVA must be diluted with water in a ratio of one to one. Then the newspapers are torn into small pieces, soaked in the prepared adhesive solution, and the base is carefully covered with them, according to the papier-mâché principle. The base will need to dry for at least a day. The edges can be shaped by placing the base in a basin and bending the edges upward.
While the base dries, you need to sew the cover. A circle with a diameter of 28 cm is cut out of the fabric, two strips are cut out - one 12 cm wide and 1.5 meters long, the second - according to the shape of the base plus seam allowance. First, the main part is sewn, then the circle is sewn to it. After the turn of the edges. Here you need to be careful, first baste the circle, then stitch it on a sewing machine or sew it by hand. The case is ready.
“Wear” a hat. The finished cover must be attached with glue to the base so that the top sticks, without staining the fabric or catching other parts. After this, the cover is put on entirely and secured at the bottom. It is better to glue the fields pointwise so that the folds are preserved.
From cardboard you need to cut a circle of the same diameter as the bottom, cover it with the main fabric and attach it to the bottom of the hat with a glue gun, additionally securing it with a ribbon.
The hat is decorated with a white ribbon and other decor as desired. The wedding top hat is ready.

By analogy, you can sew jewelry for the bride, just take white fabric and reduce all the details. How is such a hat attached to the car lid? For magnets or suction cups, it is better not to use glue for fastening. You can decorate the bride's car with a white hat - it will look beautiful and match the groom's car.

Is it possible to put wedding license plates on a car?

Playful wedding numbers

Most newlyweds do not bother with making wedding numbers and simply buy ready-made stickers. Of course, such decor has a right to exist, but still, if you run into an inspector who is too correct, you may end up getting either a fine or a warning.

If you do not want your holiday to be overshadowed by such a nuisance, then take care of such decoration in advance and order official wedding license plates for your car.

To do this, you will only need to contact the local authorities, pay the amount established by law and get additional numbers with which you will ride freely throughout the celebration.

How to decorate the hood of a wedding car with your own hands?

Butterfly decor for a wedding car

Recommendations for making butterflies

If you carefully read our article, then you probably know that in addition to flowers, ribbons and balls, you can also use butterflies to decorate a wedding procession. Such decor can be either an independent element of holiday decoration or an original addition to flowers and ribbons. There are two ways to make a butterfly.

If you have never done needlework, then find a suitable template on the Internet, print it, and then cut out the required number of butterflies from it. You can cut them out immediately in the desired color, or paint them the way you want after the workpiece is ready. If you want to create the most realistic butterfly, then make it from wire.

To make it, you will need to make a frame, cover it with nylon, and then paint it in an original way with paints and cover it with sequins. Yes, if you want your butterfly decoration to look as realistic as possible, then make insects of different sizes and randomly place them on the hood of your car.

Photos of wedding cars decorated with fabric

To create the perfect wedding car decor, newlyweds should explore ideas that have already been implemented before. Decorating cars with balls, flowers, figures and figurines, rhinestones, and beads is often combined with fabric decoration. Look at a selection of photographs with original fabric decorations for the wedding procession and choose the perfect option for yourself.

Anna Lyubimova

Ribbons are an integral element in a wedding procession. The car is traditionally decorated with multi-colored ribbons, on top of which roses are often attached as an excellent addition to this decor. Wedding ribbons for a car can be chosen according to its tone, if it is light. If the car is darker, ribbons of light shades will give it nobility and solemnity.

Decorating a wedding car with ribbons is a real highlight in decorating the newlyweds’ cortege with guests. Whatever it may be: satin and tulle, monochrome and multi-colored, decorated with roses and inscriptions.

All these decorations just need to be firmly tied to the hood of the car. Some make various additions, for example, in the form of rings on the roof, bows on the doors and side mirrors

How to decorate a wedding car with your own hands with tulle?

Recommendations for making tulle pompoms

Tulle is a fairly pliable material from which you can make many beautiful wedding decorations. If you wish, you can make a beautiful bow out of it. You can make it using the same principle as an organza bow, simply fold the material in several layers and additionally decorate it with flowers.

But if you really want to surprise your guests, then make airy pompoms from tulle. Depending on the size, they can be used as a decorative element, for example, a heart, or attached to the same ribbons or mirrors.

So:

Cut two equal sized circles from cardboard and put them together
Take tulle and wrap it around the circle, making sure that the cardboard is not visible anywhere
Take sharp scissors and carefully cut the tulle in a circle
Next, take the ribbon, place it between the cardboard circles and tie it with several strong knots
Flatten the material with your hands and your pompom will be ready.

DIY wedding car roof decoration

Wedding car roof decoration

Another decoration without which it is difficult to imagine a wedding procession are white swans. This decor is most often installed on the roof of the car, thereby showing guests and passers-by that newlyweds are traveling in the car. You can make such a decoration, like any other, in several ways.

Foam swans

Foam swans:

Buy polystyrene foam of maximum thickness
Use a pencil to draw swans on it
If you wish, you can print the template and simply trace it
Cut out the blank and start decorating it
You can cut feathers directly onto the foam or cover the workpiece with artificial feathers.
Cover the outline of the product with white satin ribbon

Swan made of tulle and salt dough

Swan made of tulle and salt dough

Mix flour and salt in equal parts and add a little water to it
You should end up with a mass that is somewhat reminiscent of plasticine.
Form it into the neck and head of a swan and put it in the oven to bake.
While this is happening, make the body of a swan from tulle
To do this, fold the material into 10-15 layers, tie it with tape and carefully straighten it
Attach a pre-painted swan head to the resulting ball

DIY decorations for car handles for a wedding

Decorations for car handles

Handle decor

Recommendations for making a lush bow

Recommendations for making a bow

Remember, the car handle is not the place that needs to be draped as much as possible. In this case, you can get by with a small, laconic decor that will be consistent with the general style of wedding decorations; for example, you can simply decorate it with multi-colored ribbons, fresh flowers, or the same tulle and organza balls.

In addition, you can try decorating the handles with small multi-colored bows. All that will be required of you in this case is to create a harmonious decor that will not interfere with the use of the handles for their intended purpose.

Master class on decorating a car for a wedding using tulle with your own hands

Tulle is quite often used as decoration for wedding cars - it is a relatively inexpensive fabric, and it also looks chic as part of the wedding decor.

As a rule, the fabric is most often used as hood or roof decor.

Decorating the hood of a car with tulle is done very simply - the fabric of the desired color is stretched diagonally from the windshield to the bottom of the hood so that it expands from below. The lower part of the fabric slams shut with the hood, the upper corner can be attached with an elastic band to the side glass or secured with double-sided tape. The fabric alone will not look complete, so it needs to be supplemented with flowers or balloons. Another decorative option is two strips of tulle, stretching from different sides of the car to the center of the hood.

Photo of DIY car decoration for a wedding made of tulle

In this case, double-sided tape or rubber bands will again help. Strips of tulle can be tied with ribbons at equal distances from each other or decorated with flowers .

DIY flowers and bouquets for a wedding car

Recommendations for making a flower

Recommendations for making peony

Recommendations for making chamomile

Recommendations for making a flower

Perhaps flowers are the most popular wedding decoration. In most cases, they can be found on the clothes of the newlyweds, in the banquet hall, and in the wedding procession. The best part is that this decor fits perfectly into any wedding theme. You can decorate the hood of a car, door handles and even mirrors with flowers.

You can use both fresh flowers and those made, for example, from fabric for all this. Of course, if you wish, you can use fresh flowers to decorate the wedding procession, but be prepared for the fact that literally a couple of hours after decoration they will begin to lose their natural beauty. If you want this decor to look perfect all day long, then make it yourself.

In this case, you will also be able to create complex flower arrangements and make bright garlands. Well, if you have never made such products, then check out the master classes located a little higher. Having studied them, you can quickly make several types of different flowers.

Decoration of car handles in a wedding procession

Doors are usually decorated with boutonnieres , but you can decorate the handles with bows or ribbons. Bows can be made by analogy with large bows, only using a piece of fabric of the appropriate size.

Photos of decorations for the wedding procession

If the wedding is planned in the warm season, then you can use fresh flowers in the decor. But you need to keep in mind that such decorations are short-lived. Therefore, artificial flowers are also quite suitable for decoration.

A video on how to make a decoration for a car for a wedding with your own hands can be viewed at the link:

Decorations for wedding car mirrors

Bouquet for wedding car mirrors

Ball on wedding car mirrors

Mirrors, just like car handles, should be decorated as succinctly as possible. In this case, it is strictly forbidden to use massive decorations that will block the driver’s view. Therefore, whenever possible, give preference to small bows, boutonnieres or fabric flowers.

If you wish, you can make a small wreath with a veil from flowers and attach all this beauty to the mirror. If you are ready to tinker, you can make a ball out of threads, decorate it with small flowers and attach it to the back of the mirror. In this case, people will see a beautiful decoration, but it will not interfere with the driver in any way.

Wedding car decor

As you probably already understood, the decor of a wedding car can be completely different. If you prefer the classics, then decorate the cortege in the spirit of the last century.

That is, limit yourself to ribbons, balls and rings on the roof of the car. If you want to do something even more interesting, then don’t be lazy and prepare, for example, flower arrangements in advance and decorate the wedding car with them.

If you want to be original, then try decorating your car:

Stickers
Multi-colored stickers
Magnets
Soft toys
Candy
Fruits

How to beautifully decorate the car of guests at a wedding with your own hands?

Guests' cars are not given as much attention as the guests' cars, but this is not a reason to neglect their decoration. The main rules for decorating guest cars are a combination of style with the entire cortege

and color combination. If contrasting decorations look great on black or white models, then for bright colors you need to choose the color scheme of the decor so that the decorations do not get lost against the bright background. For example, if a guest has a red car, then blue or yellow decorations will go with it.

Video of a master class on decorating a car for a wedding with your own hands:

As you understand, there are a lot of options for decorating a wedding car! The main thing is to decide on the details

and start doing everything in advance.
May 4, 2021, 12:32 pm
A wedding is a significant event that requires painstaking and time-consuming preparatory work. To ensure everything goes perfectly, the bride and groom spend a lot of time thinking through every detail of the celebration. An important stage in preparing for a wedding event is ordering and decorating the motorcade in which the newlyweds and their guests will travel around the city. Future spouses can implement many ideas when decorating a holiday car, but the most popular is decorating the car with fabric. Let's figure out how to do it beautifully.

Wedding Decoration Machine Hood Length

If you decide to decorate your wedding procession yourself, you must remember that all cars have different hood lengths. These parameters must be taken into account when purchasing material and when making garlands of flowers and ribbons. Therefore, before you go shopping for decor, be sure to measure the length and width of all the cars that you plan to decorate.

This can be done using an ordinary sewing meter. But keep in mind that in order to get the most accurate data, measurements must be taken at three different points. In order to find out the width indicator, the meter must be placed parallel to the bumper at the widest point. The length indicator must be measured in two different places, exactly in the middle of the hood and along its edge.

Car handle decorations for weddings

You can decorate the car handles with floral arrangements made of fresh or artificial flowers, attached with ribbons or ribbons. The composition will look very impressive if you attach ribbons fluttering as you go. Another option for decorating handles is bows with ribbons or balloons.

Photos of car handle decorations for a wedding procession

How to attach decorations to the hood of a wedding car?

Recommendations for attaching decor to cars

When planning a wedding celebration, you need to take into account all the nuances. Think about the system for attaching jewelry in advance and under no circumstances rely on the notorious chance. Therefore, when making wedding decor for cars, you must think through all the nuances of attaching both large and small elements. If you do not do this, then there is a possibility that while the car is moving it will simply fall off.

You can attach decorations to the hood of a car on:

Special stretches
Velcro
Double-sided tape
Satin ribbons
Bright threads
Rubber bands
Magnets sewn into fabric bags

Basic aspects of decorating a car for a wedding

Artificial floristry

The best offer on sptovarov

Buy

What should you consider when decorating a wedding car? First of all, you need to take safety measures when driving a car:

The decor should not cover mirrors and glass so as not to obstruct the driver’s view.
Decorations must not cover license plates. This threatens with a fine from the traffic police.
It is necessary to ensure that the fastening is secure so that the jewelry does not get lost during movement.
The speed of the car should not be high.

You can decorate different parts of the car: bumper, hood, radiator grille, door handles, interior, wheels, trunk.

To make the decor look harmonious, adhere to the following rules:

Stick to a single style when decorating your wedding procession.
Apply the basic principle of decorators - do not use more than 3 colors.
Light-colored decor looks best on dark cars, while bright shades look best on white cars.

If you are renting a car, first find out about the possibility of decorating the vehicle.

How to decorate a wedding car with balloons?

Decoration idea #1

Decoration idea #2

Decoration idea #3

If you decide to use balloons to decorate your wedding car, then give preference to latex products. Although such decoration will cost you a little more than others, it will withstand all the tests that await it while the car is moving. As for the decoration itself, everything is simple.

Large balls can be arranged in groups of two or three and mounted on the hood. If you want to get a more original decor, then buy small and medium-sized balls and make a heart, an original garland, the inscription Love or small flowers from them. If you want to truly surprise your guests, then use not only round and oval items, but also long ones to create festive elements.

How to attach wedding decorations to a car

Firstly, you can stretch ribbons under the hood and attach flowers or toys to them. Usually a simple elastic band is sewn to one end of the tape, which is threaded under the hood and then sewn to the other end of the tape.

The second option is to use special suction cups. They are sold in theme stores. Usually they already have a fishing line attached to them, with which you can securely fix the jewelry to your car.

The third option is to use magnets. It is very convenient, but the difficulty is to find good, strong magnets: refrigerator magnets will definitely not help you with this. You can order the magnets you need via the Internet in specialized stores.

Another way is to attach the decor with double-sided tape. This is very convenient, but not always reliable: it is better to buy several reels in advance and conduct a test drive in conditions close to combat conditions. The downside is that it won’t be easy to remove the tape from the car the next day; the main thing here is not to scratch the paint.

Finally, the last option is to use those decorations in the design of which everything is already provided for: that is, magnet decorations and sticker decorations.

You can’t make car decorations with your own hands like in the photo, but ordering stickers or magnets is not at all difficult; dozens of companies specializing in the production of printing and various souvenirs do this. But you choose the design yourself: you can order it from professionals or make a sketch on the computer yourself. You can make stickers and magnets with butterflies, flowers, superheroes, photos of newlyweds - your imagination is unlimited. It may be more expensive, but you will have the most original and completely unique wedding car. In addition, such decorations are perfect for a themed wedding.

How to decorate a wedding car with fresh flowers?

Decoration idea #1

Decoration idea #2

Decoration idea #3

Flowers are the perfect decoration for a wedding car at any time of the year. Therefore, if you don’t want to make a mistake with your holiday decor, then choose floral arrangements. All that will be required of you in this case is to find the freshest flowers possible and secure them on the car literally half an hour before going to the registry office or to the wedding.

And, of course, remember that we do not live in India and a car visually similar to a flowerbed will cause slight bewilderment among others. Therefore, try to decorate it in such a way as not to overdo it with flowers.

Flowers can be placed in the following places:

In the form of a wreath on the roof of a car
On the hood (in the form of garlands)
On the radiator (voluminous flower arrangements)
On mirrors and handles (small bouquets)