DIY bridal bouquet on a porta bouquet

How convenient is the accessory?

A bouquet holder is a plastic frame to which living plants are attached. It is shaped like a microphone. Inside the plastic base there is a floral sponge. A damp sponge nourishes the plants. Thus, the bride’s bouquet on the porta bouquet remains fresh for a long time. This is especially important for quickly fading flowers.

In addition to practical, the plastic frame also performs an aesthetic function. It helps create a perfectly smooth round accessory. Without a holder it is impossible to assemble some types of compositions. For example, a cascading bouquet without a base holder is too heavy and uncomfortable for the bride. As a result, a porta bouquet maker helps plants stay fresh longer and makes complex bouquet options possible.

Candy mood

Nowadays, bouquets of sweets are becoming increasingly popular. They are a good competitor to traditional bouquets of fresh flowers, as they look very beautiful, and in addition, they are edible, do not fade and are a universal gift for any celebration. You can create such a porta bouquet with your own hands:

To create it you need:

plastic bottle;
floral and stationery corrugated colored paper;
wooden skewers;
scissors;
a piece of foam;
tape and glue gun.

Article on the topic: Knitting for children: patterns for a suit, dress, jacket, hat and booties

Using scissors, cut out the middle of the plastic bottle and cut it in half. We roll the resulting part into a tube and secure it with tape over the entire surface.

We cut out a hemisphere of the required diameter from foam plastic, attach a tube handle to it from below, insert wooden skewers into the foam on the sides of the tube and wrap it all together with tape. We cut off the excess length of the skewers with a knife or scissors.

We cover the polystyrene plastic with stationery corrugated paper, and the stem of the bouquet holder with floral paper. We tie a beautiful ribbon bow at the base.

The basis for bouquets is also often a variety of shaped stands in the form of baskets, decorative carriages or baskets. They are woven from newspaper tubes, strands or other materials and painted in different colors. The carriage can be made, for example, using colored wire or wire covered with colored corrugated paper. Instead of polystyrene foam, you can use polyurethane foam as a basis for attaching the components of the bouquet. The frame of the bouquet holder can also be wrapped with multi-colored threads instead of corrugated paper.

There can be a lot of design options, the main thing is to use a little imagination!

How a composition is created

A floral sponge is a porous material that is saturated with water. The buds, which are then stuck into the sponge, receive the necessary nutrition. Therefore, a wedding bouquet in a porta bouquet holder is convenient for long outdoor events.

Interesting! Still haven't decided which wedding bouquet to choose? This article will help you decide.

Long stems of flowers are cut and inserted into a sponge. The bouquet holder helps create various compositions, so even a beginner can handle assembling the round accessory. You can remove the bud at any time and correct any imperfections.

The handle of the workpiece must be decorated with cord or ribbon. The color and texture of decorative elements are chosen in accordance with the style of the composition.
To prevent the hand from slipping along the handle, florists use a combination of smooth and fleecy ribbons.

Accessories for decoration

A wedding bouquet can be collected from the most beautiful flowers. But what will give it charm and charm is the way the stems are fastened and what accessories were used to create this mini-masterpiece of floristry.

Based on the type of decoration on the foot, the design of the foot of the bride's bouquet can be divided into several parts. This:

Fabrics – satin, lace, silk ribbons, cotton and linen napkins. Fabrics can be combined with each other. For example, a bouquet with legs decorated with cotton and lace, tied with a satin ribbon, looks sophisticated. Linen printed fabrics surprisingly subtly highlight the beauty of both exquisite roses and bouquets of wildflowers.

Beads, buttons, beads and beads, crystals or semi-precious minerals. You can wrap a string of pearls around the stem of the bouquet or add shimmering crystals along the spiral of the stem. Minerals will make the bouquet heavier, but will add expensive chic to the bride’s entire appearance.

Brooches and pins are the lot of retro weddings. By decorating the stem of the bouquet with brooches with semi-precious stones or a pin made of silver or gold, the bride creates a talisman for her happiness.

KNOWLEDGE BASE: Wedding bouquet of eustoma - grace and charm of unusual buds

Mini-frames with portraits of loved ones or miniatures of memorable moments of the newlyweds - such decoration for the bouquet stem is worthy of a separate photo shoot.

Natural materials such as tree bark, straw, cotton, shells add fashionable charm to wedding bouquets.

The combination of all the above decoration details will allow you to create your own unique bouquet.

Who is suitable for an accessory on a frame?

A bouquet with a plastic base helps to create complex compositions.

a waterfall composition will suit a bride in a fluffy or silhouette dress;
depending on the character of the newlywed, it can be either strict or slightly careless, disheveled;
A round accessory with a short handle is suitable for short girls. To make it light, the width should not exceed 25 cm and the height 15 cm.

Flowers in a porta-bouquet holder last up to 3-7 days.

Cardboard bouquet holder

If we are talking about a wedding bouquet, then it is decorated with decorative ribbons, beads, and rhinestones. An indispensable tool for this work is a glue gun. In addition to glue, you will need a sharp knife or wire cutters, scissors, cardboard, pencil, polystyrene foam or floral foam.

The easiest way is to make a porta bouquet holder from cardboard with your own hands.

Take thick cardboard. This could be a box of household appliances.
Cut out a circle with a diameter of 20-25 cm. Cut a smaller circle inside. The result will be a donut-like base.
Cut strips of decorative fabric (organza, felt or any other) or use a wide ribbon.
Apply the fabric over the donut, making small folds towards the center to create a beautiful drape.
Use an awl to poke holes in the inside of the donut.
Thread the floral wire through the hole and twist it into a rope to form a handle.
Glue an oasis or piece of foam in the center. You will insert flowers into it.

As a result, you should get the basis for the bouquet - portbuktenitsa. To improve its appearance, artificial leaves, corrugated paper or other decorations are glued to the reverse side.

If you want the base to have a cone shape, then you need to cut the template and twist it into a cone, gluing the edges.

For the handle, you can use a cardboard tube left over from paper towels, since it is more reliable. Or you can roll a cardboard cylinder with your own hands. The hole must be sealed, and the handle itself can be decorated with lace or braid.

When a frame is not needed

For a wedding in a rustic, country or Provence style, plants on their own legs are more suitable than on plastic ones. The stems are secured with tape. This bouquet lasts less. It is better to form it a few hours before the celebration.

Decorating the leg according to the wedding style

The wedding style determines the decoration details. Therefore, when choosing the design of the stem of a wedding bouquet, you should pay attention to the most suitable options according to the chosen wedding theme.

For a European-style wedding, the classic bouquet design is suitable - lace, satin, silk ribbons, pearl threads.
A themed celebration in a retro style will allow you to choose the decor of the bouquet stem according to the chosen era. The 20s were chic beyond measure; you can safely use glitter, sequins, minerals, rhinestones, and gold ribbons. Tiffany wedding - they use a combination of white and turquoise fabrics, the turquoise stone itself, precious brooches, and pins. “Hipsters” is a triumph of bright colors and large decorative details. Red beads on a white background, photographs in mini frames.
A nautical wedding and all themes related to the sea - you can add small and large shells, corals, white and blue fabrics, red accents from small beads to decorate the bouquet.
A boho wedding is a combination of sophistication and simplicity at the same time. The stem of the bouquet is boldly decorated with lace, cotton, beads, brooches and beaded flowers.
Provence is a theme containing the subtle aroma of French lavender and notes of French wildflowers. The decoration uses cotton and linen, straw threads, purple beads and seed beads, and keys.

KNOWLEDGE BASE: Wedding bouquet without flowers: how to make real beauty from scrap materials

Florist

Thanks to the bouquet holder, you can play with design and experiment with colors. That is, it is easy to create accessories in a romantic spirit or extravagant style. In addition, round bouquets, due to their small size, are quite light. Alina Malykhina

It will be difficult to create a composition with butterflies and other decorative elements on wire on a porta bouquet. In this case, the fittings are attached to living stems and secured with tape.

Finally, you can do without a base if the wedding scenario includes replacing the bouquet. For example, one for painting, the other for photography. In this case, you can create a bouquet with a porta bouquet with your own hands. This way you will save money and time. Experienced florists can offer various options for accessories.

In what cases is it better to refuse it?

There are times when brides, instead of a bouquet on a porta bouquet, prefer another option for decorating a flower arrangement. They have their own reasons for this, for example the desire to hold the flowers by their direct stems, and not by the plastic stem. Or when the newlywed prepares several bouquets for a celebration: for painting or for a party. Then there is the opportunity to make different versions of bouquets - let one be on a porta bouquet, and the second without it.

If you choose an artificial flower arrangement with rhinestones, stones, butterflies, then a base is simply not required. Often such elements are attached to a metal wire and tied at the bottom with fabric ribbons. If the bride chooses several living stems, it is better to arrange them without using additional fastening. Just tie such a wedding bouquet with a satin ribbon and do not use a porta bouquet.

How to make it yourself

Before starting work, you will need to decide on the colors. Flowers should match the wedding dress, harmonize or contrast with it, but not get lost against the background of the fabric.

The oasis must be removed from the holder and placed in a container of water. The sponge was well soaked if it sank. There is no need to press on the sponge; it will get wet on its own.

When composing a bouquet you need to adhere to the following rules:

smooth is combined with fluffy (both in greenery and flowers);
Before fixation, plants are cut with sharp pruning shears at an angle;
light greens are shaded by dark ones, for example, dark broom and May-like light shepherd's purse are successfully combined;
to fill the porta bouquet, easily accessible flowers are usually taken - roses, ornithogalum, peonies, carnations, hydrangeas, chrysanthemums and other plants.

Making a bouquet in a porta bouquet holder yourself

You will need:

Portbukketnitsa
Floral sponge or foam
Double tape
Copper wire
Handle tape
Scissors, preferably garden shears
Decorative cord and pins
Glue gun

Flowers for creating a bouquet can be selected to your taste. The most commonly used are roses, chrysanthemums, peonies, shepherd's purse greens, aspidistra leaves, and Italian ruscus. In principle, you can take any flowers, the main thing is to pay attention to their freshness in order to avoid rapid fading of the buds. Don't forget to use them for the groom's boutonniere too.

First you need to buy a ready-made portaquet holder. A sponge is pulled out of it and immersed in water. When it sinks, it will mean it is full and ready for use. The leg is filled with some material to prevent water leakage. Then the oasis is fixed. The bouquet stem is decorated using available materials and a glue gun.

After this, you can move on to decorating the flowers. And here it all depends on your creative capabilities. Don't forget that the flowers need to be cut at an angle. This extends their lifespan. Do not get carried away with greenery so that it does not overshadow the buds. The bouquet can be decorated with sparkles, and to add shine in general, use varnish. The entire composition should resonate with the main style of the event.

Why do you need a frame for flowers?

Flowers on stems are not always used in wedding bouquets. Sometimes you need to make a complex composition, and in this case the frame is simply irreplaceable. A frame is also needed for artificial flowers, which are glued to the base or inserted using pins and wire.

If we consider a classic porta bouquet, it consists of a handle and a rounded sponge attached to the top, which is soaked in water or a special solution. Flowers are inserted into the sponge to prevent them from wilting.

A do-it-yourself portbuktenitsa consists of almost the same elements. It has a handle and a base to which flowers are attached.

When creating a frame, you must remember that it must be durable and beautiful.

In addition to the main bouquet, you can make a smaller copy of it, which you will have to throw to your girlfriends. They also make a boutonniere for the groom and other floral arrangements. All of them should be harmoniously combined in color and consist of similar plants or artificial flowers.